Simulation stopped, PC: 80008B1F (BRB 80008B1F)
sim> att rx UNLUSER011.RX1
sim> c
Username: SYSTEM
Password: 
        Welcome to VAX/VMS version V4.0
$ 
$ mc sysgen
SYSGEN>  CON CONS
SYSGEN>  EXIT
$ @sys$update:vmsinstal unluser011


        VAX/VMS Software Product Installation Procedure V4.0


It is 1-OCT-1984 at 11:25.
Enter a question mark (?) at any time for help.

* Are you satisfied with the backup of your system disk [YES]? yes
* Where will the distribution volumes be mounted: CSA1:
%DCL-I-ALLOC, _CSA1: allocated

Please mount the first volume of the set on CSA1:.
* Are you ready? yes
%MOUNT-I-MOUNTED, UNLUSER011   mounted on _CSA1:

The following products will be processed:

  UNLUSER V1.1


        Beginning installation of UNLUSER V1.1 at 11:25

%VMSINSTAL-I-RESTORE, Restoring product saveset A...



        1)  Apply all fixes to the system
        2)  Create a file with the descriptions of all fixes
        3)  Both of the above

* What would you like to do [3]: 
%UNLUSER-I-FIXDESC, The fixes are described in SYS$UPDATE:UNLUSER011.TXT
* Do you want to purge files replaced by this installation [YES]? 
%MOUNT-I-MOUNTED, UNLUSER011   mounted on _CSA1:

 1) ALLUSER_LICENSE (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.UNLUSER011]LOGINOUT.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.UNLUSER011]LOGINOUT.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.UNLUSER011]LOGINOUT.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.UNLUSER011]LOGINOUT.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.UNLUSER011]LOGINOUT.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.UNLUSER011]LOGINOUT.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.UNLUSER011]LOGINOUT.EXE;1

%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...

        Installation of UNLUSER V1.1 completed at 11:26

%VMSINSTAL-I-REBOOT, This product requires that the system be rebooted.
Please mount the console volume on CSA1:.
* Are you ready? yes
%MOUNT-I-MOUNTED, CONSOLE      mounted on _CSA1:


        SHUTDOWN -- Perform an Orderly System Shutdown


%SHUTDOWN-I-BOOTCHECK, Performing reboot consistency check...
%SHUTDOWN-I-CHECKOK, Basic reboot consistency check completed

%SHUTDOWN-I-OPERATOR, This terminal is now an operator's console.
%%%%%%%%%%%  OPCOM   1-OCT-1984 11:26:34.78  %%%%%%%%%%%
Operator status for operator _OPA0:
CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER, SECURITY,
OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9, OPER10, OPER11,
OPER12

%SHUTDOWN-I-DISLOGINS, Interactive logins will now be disabled.
%SET-I-INTSET, login interactive limit = 0, current interactive value = 1
%SHUTDOWN-I-STOPQUEMAN, The queue manager will now be stopped.

SHUTDOWN message from user SYSTEM at _OPA0:   11:26:35
The system will shut down in 0 minutes; back up soon.  Please log off.
Reboot after UNLUSER V1.1 installation.

1 terminal has been notified.

%SHUTDOWN-I-SITESHUT, The site-specific shutdown procedure will now be invoked.
%SHUTDOWN-I-STOPUSER, All user processes will now be stopped.
%SHUTDOWN-I-REMOVE, All installed images will now be removed.
%SHUTDOWN-I-DISMOUNT, All volumes will now be dismounted.
%SHUTDOWN-I-DISMOUNTDEV, Dismounting device _CSA1:.
%%%%%%%%%%%  OPCOM   1-OCT-1984 11:26:37.53  %%%%%%%%%%%
Message from user SYSTEM
_OPA0:, The system shutdown was requested by the operator.

%%%%%%%%%%%  OPCOM   1-OCT-1984 11:26:37.60  %%%%%%%%%%%
Logfile was closed by operator _OPA0:
Logfile was SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;1

%%%%%%%%%%%  OPCOM   1-OCT-1984 11:26:37.66  %%%%%%%%%%%
Operator _OPA0: has been disabled, username SYSTEM

SYSTEM SHUTDOWN COMPLETE - USE CONSOLE TO HALT SYSTEM
  
Infinite loop, PC: 80008D7E (BRB 80008D7E)
